Bosch Professional GWS 8-125 C Operating Instructions Manual page 11

12 | English
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Protection Guard for Grinding
Place the protection guard 8 on the spindle col-
lar. Adjust the position of the protection guard 8
to the requirements of the operation. Lock the
protection guard 8 tightening the locking screw 7
with an allen key 3.
Adjust the protection guard 8 in such a man-
ner that sparking is prevented in the direc-
tion of the operator.
Note: The encoding keys on the protection guard
8 ensure that only a protection guard that fits the
machine type can be mounted.
1 609 929 L33 | (24.7.08)
GWS... 8-125 CE
Professional
0 601 ...
W
W
-1
min
-1
min
– 11000
mm
mm
kg
Protection Guard for Cutting
For cutting metal, always work with the pro-
tection guard for cutting 13.
For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 20.
The protection guard for cutting 13 is mounted in
the same manner as the protection guard for
sanding 8.
Auxiliary Handle
Operate your machine only with the auxiliary
handle 5.
Screw the auxiliary handle 5 on the right or left of
the machine head depending on the working
method.
850 C
378 ... 377 7..
377 9..
850 850
490 490
11000 11000
–
2800
125 125
M 14 M 14
22 22
–
1.9 1.9
/ II / II
Bosch Power Tools
850 CE
378 7..
378 9..
850
490
11000
2800
– 11000
125
M 14
22
1.9
/ II