Notes On Use - Audio Technica BP3600 User Manual

Immersive audio microphone
Table of Contents

Advertisement

Notes on use

Be sure to read the connected device's user manual before use.
When the product is used for a long time, the product may become discolored due to ultraviolet light (especially
direct sunlight) and wear.
Make sure to hold the plug when connecting and disconnecting the cable. The cable may become severed or an
accident may occur if you pull on the cable itself.
When using the cable, be careful not to twist it to prevent damage to the cable.
Do not wind the cable at the base of the plug. Doing so may result in disconnection.
When plugging the cable into the microphone and the connected device, check that the connector is facing in the
correct direction before inserting it straight. Inserting the connector or plug diagonally may cause a malfunction.
For important recordings, perform a trial recording beforehand to make sure that the sound is recorded correctly.
Audio-Technica will not be liable in any way for any loss or damage to software or data connected to the product.
Do not apply excessive force to the connector by rotating the microphone module.
When installing the product in a suspended position, be sure to attach a wire to prevent the product from falling.
When installing the product in a suspended position, Audio-Technica will not be liable in any way for accidents such
as falling due to inadequate strength of the installation or equipment.
2

Advertisement

Table of Contents
loading

Table of Contents