Table 1-Technical Specifications; Table 2-Electrical Specifications - Daikin EWLQ025KCW1N Installation, Operation And Maintenance Manual

1. INTRODUCTION
The unit is supplied and shipped with a holding charge of 0.5 bar nitrogen (N2). This unit must be charged with R410A
refrigerant.
Pay attention to the selection of your remote condenser. Make sure to select a remote condenser developed for use with
R410A.
The EWLQ units can be combined with Daikin fan coil units or air handling units for air conditioning purposes. They can
also be used for supplying chilled water for process cooling.
The present installation manual describes the procedures for unpacking, installing and connecting the EWLQ units.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for
commercial use by lay persons.
Sound pressure level is less than 70 dB(A).
Model EWLQ
Dimensions HxWxD
Machine Weight
Connections
•
Chilled water inlet and outlet
•
Condenser discharge connection (copper)
•
Condenser liquid connection copper)
Model EWLQ
Dimensions HxWxD (mm)
Machine weight
Connections
•
Chiller water inlet and outlet (mm)
•
Condenser discharge connection
(copper)
•
Condenser liquid connection (copper)
(1) Refer to the operation manual or engineering data book for the complete list of specifications, options and features.
D-EIMHP01601-22_01EN 4/26

Table 1-Technical specifications

(kg)

Table 2-Electrical specifications

General EWLQ
Power supply
Phase
(Hz)
Frequency
(V)
Voltage
Voltage (%)
tolerance
(1)
014 025
(mm)
600x600x600
(kg) 104 138
G1
3/4''
5/8''
5/8'' 5/8''
049
600x600x1200
252
G 1-1/2
3/4''
5/8''
(1)
014-064
3N~
50
400
±10
033
149
Y
3/4''
5/8''
064
274
3/4''
5/8''