Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Philips screwdriver #1 and #2
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Left-side cover
Chassis
Solid-state drive
System board
Wireless card
System board
Hard drive
Chassis
VGA-connector cover
Chassis
Power-supply unit
Chassis
10
Removing and installing components
Screw type
Quantity
6-32
2
M2x3.5
1
M2x4
1
6-32, pan head
4
4-40 (captive)
2
NOTE:
on computers
shipped with 12
Generation Intel
Core i5F and
th
12
Generation
Intel Core i7F
processors.
#6-32, hex head
3
Screw image
Only
th
2
Advertisement
Table of Contents
