Power Button; Removing The Power Button; Installing The Power Button - Dell Vostro 3910 Service Manual

Power button

Removing the power button

Prerequisites
1. Follow the procedure in
2. Remove the left-side
3. Remove the front cover.
4. Remove the hard drive.
About this task
The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure.
Steps
1. Place the computer on its side with the left side facing up.
2. Disconnect the power-button cable from the system board.
3. Press the release tabs on the power button to release it from the slot on the chassis.
4. Route the power button along with its cable through the slot on the chassis.
5. Remove the power button and its cable from the front of the chassis.

Installing the power button

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
Before working inside your
cover.
computer.
Removing and installing components 23