Yamaha YZFR7P Owner's Manual page 25

To reset the fuel reserve tripmeter,
change the display to the fuel reserve
tripmeter, and then hold the "RES"
switch until it is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
Instantaneous fuel consumption
display
1
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, hold the "SEL"
switch until the measurement units
change.
 "km/L": the distance that can be
traveled on 1.0 L of fuel.
 "L/100 km": the amount of fuel
necessary to travel 100 km.
 "MPG": the distance that can be
traveled on 1.0 US gal of fuel.
TIP
When traveling under 10 km/h (6 mi/h),
EAU93041
"- -.-" is displayed.
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
Instrument and control functions
Average fuel consumption display
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
EAU87790
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
fuel consumption measurement units,
hold the "SEL" switch until the mea-
surement units change.
 "AVE_ _._ km/L": the average dis-
 "AVE_ _._ L/100 km": the average
4-7
1
tance that can be traveled on 1.0 L
of fuel.
amount of fuel necessary to travel
100 km.
EAU93051
4