Generalities; Control Cables - Nanni Z4.205 Operator's Manual

S08 MAINTENANCE

GENERALITIES

WARNING !
Perform maintenance operations having the engine
stopped and cold. Get the the starting key out from the
panel, put it in your pocket and turn off the power supply.
Read this whole chapter and take all safety precautions
before contemplating any maintenance or repair work.
Make sure you understand how to perform every
operation.
CAUTION !
Clean the engine before any maintenance. Watch for any
oil or fluid drop as it is an evidence of a leak somewhere.
CAUTION !
Do not let oil, fuel or grease deposits build up around
the engine as they may increase the risk of fire in the
engine compartment. Furthermore, these deposits may
hide potential heavy unseen failures.

CONTROL CABLES

The engine rpm and the gearbox shift command may be
controlled by mechanical control cables connected to
the control lever.
Adjust the tightness of the cable as required. If any
defect appears (rust, crack, etc.), the control cable must
be replaced.
Generic picture
56