Initialization Of Power Window; Rear Gate - Subaru Crosstrek 2017 Owner's Manual

Operating the windows
To open:
Press the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver s side door, is in the lock position,
the passengers windows cannot be oper-
ated with the passengers switches.
Initialization of power win-
dow
If the vehicle s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver s door.
2. Turn the ignition switch to the ON
position.
3. Open the driver s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.
5. Open the driver s side window com-
pletely by fully pushing down the power
windows switch.
Keys and doors/Rear gate

Rear gate

Lock/unlock
The rear gate can be locked and unlocked
using any of the following systems.
. Power door locking switch: Refer to
Power door locking switches
. Keyless access with the push-button
start system (if equipped): Refer to Key-
less access with push-button start system
2-9.
. Remote keyless entry system: Refer to
Remote keyless entry system
NOTE
If the rear gate cannot be unlocked due
to a discharged vehicle battery, a
malfunction in the door locking/unlock-
ing system or other causes, you can
unlock it by manually operating the
rear gate lock release lever.
For the procedure, refer to Rear gate
if the rear gate cannot be opened
18.
CONTINUED
2-37
2-8.
2-22.
9-