Disarming The System - Subaru Crosstrek 2017 Owner's Manual

2-30
Keys and doors/Alarm system
1) Door lock sensor
Security indicator light (type A)
Security indicator light (type B)
6. Carry the access key and touch the
door lock sensor. All doors (including the
rear gate) will lock, an electronic chirp will
sound once, the hazard warning flashers
will flash once, and the security indicator
light will start flashing rapidly. After rapid
flashing for 30 seconds (standby time), the
security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.
If any of the doors or the rear gate is not
fully closed, an electronic chirp sounds
five times, the hazard warning flashers
flash five times to alert you that the doors
(or the rear gate) are not properly closed.
When you close the door, the system will
automatically arm and doors will automa-
tically lock.

Disarming the system

Perform either of the following procedures.
. Briefly press the disarm button (for less
than 2 seconds) on the access key/remote
transmitter.
. Carry the access key and perform
either of the following procedures (models
with keyless access with push-button
start system ).
Grip the front door handle.
Press the rear gate opener button.
The following door(s) will unlock, an
electronic chirp will sound twice and the
hazard warning flashers will flash twice.
. Driver s door: when either of the
following procedures is performed
Press the disarm button on the
access key/remote transmitter briefly
(for less than 2 seconds).
Grip the driver s door handle (mod-
els with keyless access with push-
button start system ).
. Rear gate: when pressing the rear gate
opener button (models with keyless ac-
cess with push-button start system )
. All doors: when gripping the front
passenger s door handle (models with
keyless access with push-button start
system )