Panasonic DP-150 Service Manual page 87

4. F6 : Adjustment and programming
* The missing code number is [Not Used].
Code Item
C00 Adjusting horizontal ratio Adjustment of the horizontal ratio
C01 Adjusting vertical ratio
C02 Adjusting copy ratio
C04 Original registration
detecting timing
C05 Paper registration
detecting timing
C07 Registration void of image Adjustment of registration void
C08 Trail edge timing of original Adjustment of black line
C09 Trail edge timing of copy Adjustment of black line at enlargement
C10-C16 (Reserved)
C17 Grid standard voltage
C19 Bias standard voltage
(developing)
C22 Transfer electric current
(A4/LETTER)
C23 Transfer electric current
(A5/INVOICE)
C24 Transfer electric current
(B5)
C25 (Reserved)
C31 Fuser temperature
C35 Toner level detecting value
1
C36 Toner level detecting value
2
correction
5-6
Functions
for full size copying
0.1% (-9 to +9)
Adjustment of the vertical ratio for
full size copying
0.1% (-9 to +9)
Adjustment of the copy ratio
0.1% (-9 to +9)
Adjustment of original registration
detection timing
0.2mm (-30 to +30)
Adjustment of delay time for the
registration roller clutch ON
0.25mm (-30 to +20)
0.425mm (-0 to +99)
(–: Advanced +: Delayed)
0.5mm (-9 to 0)
(–: Advanced +: Delayed)
0.425mm (-9 to +15)
Adjustment of the standard voltage
1.67V (+99 to -17)
Adjustment of the standard voltage
1.67V (+99 to -29)
Adjusting values for C40
Adjusting values for C40
Adjusting values for C40
Adjustment of fuser temperature
0.7 ˚C/step
+: Raise the set up temperature.
–: Lower the set up temperature.
0.02V (-14 to +20)
0.02V (-50 to +50)
Default
0
0
7
0
0
0
0
0
0
0
0
0
0
0
0
0
(To be continued)