Appliance Communication - GE 27 Owner's Manual & Installation Instructions

Appliance Communication

(on some models)
REGULATORY INFORMATION
FCC/IC Compliance Statement:
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Labelling: Changes or modifications to this unit not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
ConnectPlus module only (or similar communication module)
RF Exposure -
between the ConnectPlus device and the user's body must be maintained at all times.
42
49-1000471 Rev. 1