Installation; Speaker Connections; Antenna Connections; Am/Mw Antenna - Philips MCW770 User Manual

MC W770/22.1 eng 7/23/04

Installation

Warning:
Never make or change connections
with the mains supply switched on.

Speaker connections

Use the supplied speakers only. Using
other speakers can damage the set or
the sound quality will be negatively
affected.
Connect the cable of the left speaker to L
(red and black) and the cable of the right
speaker to R (red and black) as follows:
Press the clip of the red terminal and fully
insert the stripped portion of the coloured
(or marked) speaker cable into the socket,
then release the clip.
Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket,
then release the clip.

Antenna connections

AM/MW antenna

The loop antenna supplied is for indoor use
only.
1
Assemble the loop antenna as shown
below.
14
16:07 Page 14
2
Fit the plug of the loop antenna to
AM ANTENNA as shown below.
3
Adjust the position of the antenna for
optimal reception (as far away as possible
from the TV,VCR or other radiation
sources).

FM antenna

The wire antenna supplied can only be used
to receive nearby stations. For better
reception we recommend using a cable
antenna system or an outdoor antenna.
1
Extend the wire antenna and fit it to
FM ANTENNA as shown below.
N T E N N A
Note: If you are using a cable antenna system
or an outdoor antenna, fit the antenna plug to
FM ANTENNA instead of the wire antenna.
2
Move the antenna in different positions for
optimal reception (as far away as possible
from the TV,VCR or other radiation
sources).
3
Fix the antenna's end to the wall.
F M A N T E N
N A
A M A N T E N
N A
FM A N T E N FM A N T E N
N A
A M A N T E N
N A
N A