Programming Track Numbers; Clearing The Programme - Philips MCW770 User Manual

MC W770/22.1 eng 7/23/04
Playback features

Programming track numbers

Programming tracks is possible when
playback is stopped.You can select up to 99
tracks (also MP3 tracks) and store them in
the memory. Programming is possible from
the current selected disc only.Therefore
you cannot combine MP3 tracks and audio
tracks or tracks from more than one CD.
CD TUNER
CD 1
CD 4
REPEAT PROGRAM
SLEEP CLOCK
1
Load the desired disc in the disc tray.
2
In case a source other than CD is active
(e.g.TUNER) press SOURCE on the set
repeatedly until CD is selected or press CD
on the remote control.
3
Press PROGRAM on the remote control to
enter the programme menu.
starts blinking.
PROGRAM
Note: If no button is pressed within 20 seconds the
set will automatically exit from the programme menu.
50
16:07 Page 50
AUX PC LINK
CD 2 CD 3
CD 5
VOL
ALBUM
BROWSE
SHUFFLE DISPLAY
TIMER TIMER ON/OFF
Press 4 or ¢ repeatedly to select the
4
desired track.
MP3-CD only:
Press ALBUM 5 or ALBUM ∞ to find the
album number you wish to select and then
press 4 or ¢ repeatedly to skip to the
desired track.
5
Press PROGRAM on the remote control to
store your selection in the memory.
CD 1 (or 2, 3, 4, 5), P with the total
number of tracks programmed and the
total playing time are displayed.
The number of the programmed track
and PROG are displayed.
MP3-CD only:
CD 1 (or 2, 3, 4, 5) and P with the total
number of tracks programmed are
displayed.
The album number and track number of
the programmed track are displayed.
6
Repeat steps 4–5 to select and store other
tracks.
Notes:
If you try to store more than 99 tracks,
PROGRAM FULL will be displayed.
If the total playing time of the programme
has reached 100 minutes --:-- is displayed
instead of the total playing time.
7 Ç
Press STOP once to end programming.
To start playback of the programme
0 0
press É Å.

Clearing the programme

1
If necessary press STOP
Ç
2
Press STOP again to clear the programme.
goes off and PROGRAM
PROGRAM
CLEARED is scrolled.
Note:The programme will be also erased if you
open the disc tray, if you switch to another source
or if you disconnect the set from power supply.
Ç
to stop playback.