Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co,;Ltd
After completing the above steps, use the power supply of the equipment, and then power up the router.
After power on, wait for about 1 minute, and the WORK indicator on the panel starts flashing at a frequency of
about 1S, indicating that the startup is completed. In addition, on the panel, the 4G signal indicator and the 4G indicator
in network properties also start to WORK normally (the device is connected to 4G network by default). The amount of
4G signal indicator light is determined by the current network signal quality.
1.3 Web access
On the PC, open any browser and input 192.168.10.1 to enter our router Web login interface, as shown in the figure
below:
Here, our default password is: root
After entering the password, you can enter our web administration interface.
In the bottom right corner of the Web page, you can click the following link to enter our company's official website,
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co,;Ltd
E880-IR01 user manual
4
Advertisement
Table of Contents
