Load Balancing - Ebyte E880-IR01 User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd
implement communication functions on different network segments, a static route can be added to R1 to implement it.
First set a static route on R1, and set up on R2 with the same principle, as shown in the figure below:
After adding, forwarding option should be changed from Deny to Accept in Network-> Firewall-> Basic Settings, as
shown in the figure below.
No static routing function is added by default.

4.4.6 Load balancing

Load balancing function can dynamically assign the router's multiple network interfaces (such as wired Ethernet and
4G wireless) to the priority of use of each network, enable, and even the proportion of flow
enables users to make relevant allocation mechanisms based on the actual network environment. In the following, we
will explain the load balancing function.
On our router, two network interfaces connected are wan (wired Ethernet) and wwan (4G wireless). After we power
on, we can check the operating status of the two interfaces in the status-> load balancing option.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co,;Ltd
E880-IR01 user manual
between network ports. It
31