Quick Start; Preparation; Hardware Connection - Ebyte E880-IR01 User Manual

4g industrial router

Table of Contents

Chengdu Ebyte Electronic Technology Co,;Ltd

1. Quick start

In order to ensure that the products that users get at the first time are qualified, we provide a simple testing process

for users to refer to. In the whole process, the customers can get started quickly.

Before the 4G router works, users need to prepare at least one PC, one network cable, product supporting devices

and a 4G SIM card with traffic.

As shown in the figure above, before charging the device (the charging position has been marked on the panel), the

customer must insert the 4G SIM card into the value card slot (chip end up), otherwise the 4G function will not be

enabled.

Connect the WIFI antenna and 4G antenna to the SMA interface under the mark of the device panel, and connect the

computer to the LAN port of the device (LAN1~LAN4 can be used). In order to detect 4G function, the WAN port

cannot be connected to Ethernet.

In order to ensure that the computer can enter the WEB management interface through the LAN, the customer needs

to ensure that the computer network property automatically obtains the IP address and automatically obtains the DNS

server address, as shown in the figure below.

E880-IR01 user manual

Table of Contents