Servicing The Spark Plug - Toro TimeCutter MX 5050 Operator's Manual

A
B
C D
F
E
g027477
Figure 33
5. Slowly pour approximately 80% of the specified oil
into the filler tube (Figure
3/4
34).
A
C
E

Servicing the Spark Plug

Service Interval: Every 200 hours—Check spark plug(s)
condition and gap.
Every 500 hours—Replace the spark plug(s).
The spark plug is RFI compliant. Equivalent alternate brand
plugs can also be used.
Type: Champion XC12YC (or equivalent)
Air Gap: 0.76 mm (0.03 inch)
Removing the Spark Plug
1. Disengage the blade-control switch, move the motion
controls outward to the park position, stop the engine,
and remove the key.
2. Before removing the spark plug(s), clean the area
around the base of the plug to keep dirt and debris out
of the engine.
3. Remove the spark plug
31
B
D
g027517
Figure 34
(Figure 35).