First Use; Powering Up The Router; Router Configuration - Advantech ICR-2432 User Manual

Lte industrial router

Hide thumbs Also See for ICR-2432:

Table of Contents

3. First Use

The router will start up when a power supply is connected to it. By default, the router will

automatically log on to the default APN of the inserted SIM card. The DHCP server will assign

an addresses to the devices connected through the Ethernet port ETH0.

3.2 Router Conﬁguration

Initial router conﬁguration can be made via a web browser running on your PC. Here you

can perform router monitoring, conﬁguration, and administration. First, connect the PC to

the default LAN interface described in the Start Guide application note [1]. To get the router

interface, enter the

https://192.168.1.1

of the HTTPS protocol for secure communication over the network is required.

There is just the root user account created on the router by default. See the product

label on the router for its default password. Log in to the web interface by the root user and

his password. If logged in successfully, the user will have access to the router web interface,

see Figure 13. See the conﬁguration manual

examples of the router conﬁguration.

After logging on to the device for the ﬁrst time, we strongly recommend changing the

default password due to security reasons.

For security reasons, we highly recommend updating the router's ﬁrmware to the latest

version regularly. Downgrading the ﬁrmware to an older version than the production

version or uploading ﬁrmware intended for a different device may cause the device's

malfunction.

All routers have the WebAccess/DMP client pre-installed by default. The activated client

periodically uploads router identiﬁers and conﬁguration to the WebAccess/DMP server.

See the conﬁguration manual [2], chapter Basic Information -> WebAccess/DMP Conﬁg-

uration, for more information.

address in a web browser. Please note that usage

[2]

of the router for a detailed description and

ICR-2432

Table of Contents