Hardware Functionality; Sim Card Slots; Sim Cards Insertion - Advantech ICR-2432 User Manual

Lte industrial router

Hide thumbs Also See for ICR-2432:

Table of Contents

2. Hardware Functionality

See Chapter

1.3

for the product hardware overwiew. Table

hardware, including the links to the chapters with a detailed description.

Slots for two SIM cards are located on the right panel of the router under a metal cover. It

is necessary to insert an activated SIM card, to work properly. If the PIN is required for the

SIM, enter it in the router's web interface. The SIM cards may have different APNs (Access

Point Names) adjusted. The SIM card changing procedure is described below.

Type of SIM cards: Micro SIM (3FF) 15.0 x 12.0 x 0.76 mm.

Inserting the SIM card:

Always disconnect the router from the power supply before handling the SIM card.

Unscrew two screws on the SIM card cover and remove the cover.

To remove an inserted SIM card, use the ﬂat end of a spudger, or your ﬁngernail,

press the SIM card slightly into its slot until you hear a click. After hearing this click,

release the card, and it will pop out of its slot.

To insert a SIM card push card into the slot until it clicks into place.

Place back the cover and ﬁx it by two screws.

Figure 5: SIM Cards Insertion

ICR-2432

lists a short description of the

Table of Contents