Phonebook; Store A Name And Number - Motorola T1 Series Manual

4. Phonebook

You can store up to 50 names and numbers in the phonebook. Names can be up to 12
characters long and numbers up to 24 digits.
4.1

Store a name and number

If the T1 is connected to a switchboard, you may need to enter a pause in a stored number.
This gives the switchboard time to find an outside line.
A pause is normally stored after the switchboard access code (e.g. 9). When storing a
number, press and hold
phone number.
If you have subscribed to Caller ID Service and wish to display the name of your caller
instead of the number, save the full telephone number including the area code to your
phonebook.
You can store multiple entries with the same name. However, to prevent unnecessary
duplicated entries, you can only store the number once.
m
1. Press . The display shows PHONEBOOK.
m
2. Press , scroll
m
3. Press . The display shows
4. Enter the name and press
5. Enter the number and press
6. The display shows
7. Enter the next name and number entry that you wish to store in your phonebook or
e
press to return to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
8
Press once to enter T.
6
Press three times to enter O.
6
Press once to enter M.
WRITING TIPS
P
Press to delete the last character or digit.
u
d
Press or to move between characters or digits.
1
Press to insert a space.
1
Use twice to insert a dash.
20
#
until the display shows P. You can then continue entering the
d
to ADD NEW.
ENTER
m
. The display shows
m
to save.
ADD NEW.
NAME.
ENTER NUMBER.
Phonebook