Advertisement
Operating Manual
Mounting Installation
The model 142 in-line amplifier can be mounted with various methods. The three preferred methods of
mounting are as follows:
1. Screw mounting.
- The mounting surface should be flat, clean and free of any residue or foreign material.
- Torque screws to recommended limits below using steel washers under the heads of the
mounting screws.
2. Adhesive mounting.
- A silicone RTV is recommended for adhesive mounting of the amplifier.
- For removal, gently shear the amplifier loose from the mounting surface. Make sure not to use
excessive force as this may damage the amplifier.
3. Double-sided tape mounting.
- A strong double sided tape with acrylic adhesive is recommended (eg. 3M 444 series).
- For removal, gently shear the amplifier loose from the mounting surface. Make sure not to use
excessive force as this may damage the amplifier.
2x mounting holes for #4-40 or
M3 metric mounting screws.
Torque to 3 lb-in (0.3 Nm).
Measurement Specialties, Inc.
32 Journey, Suite 150, Aliso Viejo, CA 92656 USA
www.meas-spec.com
5 of 11
TM
+1 949-716-5377
t&m@meas-spec.com
Advertisement
