Table of Contents
Advertisement
Removal steps
Microprocessor
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 48.
2. Remove the hard disk drive. See "Heat-sink-and-fan assembly" on page 61
Notes:
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept
as clean as possible.
Removal steps
70
neo 50s Gen 3 Hardware Maintenance Manual
Advertisement
Table of Contents
