Table of Contents
Advertisement
EN
6. The shaft bearings (w) in the bottom flow meter
body (m) must not be worn, pitted, or have
scores or scratches.
Put the gear shafts into the bottom body bearings
and try to wobble them. Replace the bottom
body if a bearing has damage or the gear shafts
wobble in the bearings.
7. The bottom body's measuring chamber (v) must
not be gouged, scored, scratched, or pitted.
Replace the bottom body if there is damage to
the measuring chamber.
8. The o-ring gasket's sealing groove (x) must not
have gouges, scratches, or pitting. Replace the
bottom body if there is damage to the sealing
groove.
www.carlisleft.com
v
m
21/34
MAINTENANCE
w
x
77-3154-R1 (05/2023)
Advertisement
Table of Contents
