Wireless Transmission Indication; Module Is Being Configured; Precautions - Ebyte E22-230T22D User Manual

Sx1262 230mhz 160mw lora wireless module

Hide thumbs Also See for E22-230T22D:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

5.6.2 Wireless transmission indication



Buffer empty: the data in the internal 1000 byte buffer, are written to the wireless chip (automatic

packetization);

When AUX=1 the user initiates data less than 1000 bytes continuously, without overflow;

When AUX=0 buffer is not empty: the data in the internal 1000-byte buffer, not all written to the wireless chip

and open to transmit, at this time the module may be waiting for the user data to end timeout, or is in the process

of wireless sub-packet transmission.

[Note]: When AUX=1, it does not mean that all the serial data of the module has been emitted through wireless,

or the last packet of data is being emitted.

Only at reset and when exiting sleep mode；



Item

For the above functions 1 and 2, the output low level is given priority, that is, if any one of the

output low level conditions is met, the AUX outputs the low level;When all low level conditions are

not met, AUX outputs high level.

When AUX outputs a low level, it means that the module is busy, and the working mode detection will

not be performed at this time;

When the module AUX outputs a high level within 1ms, the mode switching will be completed.

AUX Notes

E22-230T22D User Manual

Table of Contents