Aux Detailed Explanation; Wireless Reception Indication; Wireless Transmission Indication; Resetting And Exiting Sleep Mode - Ebyte E49-400T30D Specifications

Chengdu Ebyte Electronic Technology Co.,Ltd.
for the normal operation of the module.

5.2 AUX detailed explanation

AUX is used for wireless transceiver buffer indication and self-check indication.
It indicates whether the module has data that has not been transmitted wirelessly, or whether the wireless
data has been received and not all sent through the serial port, or the module is in the process of initializing
and self-checking.

5.2.1 Wireless reception indication

After the module receives valid wireless data, it will immediately pull down AUX, and start the
serial port to output data. After the data output is completed, it will pull up AUX.

5.2.2 wireless transmission indication

After the module receives the serial port data, it will pull down AUX immediately and start sending
data wirelessly. After all data is sent, pull up AUX again.

5.2.3 Resetting and exiting sleep mode

Only at reset and when exiting sleep mode
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E49-400T30D Specifications
7