Oven Troubleshooting - Electrolux EVEP916SB Installation & User Manual

OVEN TROUBLESHOOTING

If there is a problem with the appliance, please:
• Check the points listed below before calling for service.
It may be possible to avoid a call by fixing the problem
yourself – and so continue cooking.
Problem
Oven or grill not working
Oven light not working
Oven not heating enough
Clock flashing on display
Unit smoking when first used
Functions and temperature appear
on display but oven does not work
When the door is open the fan stops
When a non fan mode is selected
the oven fan starts
The light stays on when the door
is closed
The light does not activate when
the door is opened
Shelf or telescopic runner slides
out when door is opened
Further Information
When you need information, service or replacement parts
or have a warranty enquiry, please contact the Customer
Care Centre:
• Australia - 1300 363 640, 8.00am-5.00pm
EST Monday to Friday
• New Zealand - 0800 436 245, 8.00am-5.00pm EST
Monday to Friday
Please have the following information ready: Model,
Model Number & Serial Number. This is shown on the
data plate which is visible when the oven door is open.
Possible cause
Time of day is not set
Power is not turned on
Controls are incorrectly set
Oven is in 'Demo' mode
Household fuse has blown
or circuit breaker tripped
Child-proof oven lock is activated
Light may be turned off at control panel
Lamp blown or loose socket
Household fuse has blown
Foil trays on bottom of oven
A timer function is activated
Household fuse has blown
or circuit breaker tripped
Power interruption
Protective oils being removed
Oven is in 'Demo' mode
This is normal operation
The fan is used to help the oven get
to the selected temperature as quickly
as possible
An oven function has been selected
The light has been turned on at the
control panel
Lamp blown or loose socket
Oven cavity is not level with the ground
Remedy
Set time of day
Switch on electricity
Reset controls
Exit Demo mode
Check fuses or circuit breakers
Deactivate child lock
Turn light on
Replace or tighten lamp
Check fuses
Remove foil trays
Refer timer functions
Check fuses or circuit breakers
Reset the time
Turn grill on high for 30mins and
then oven on 200º for 1 hour
Exit Demo mode
Turn light off
Replace or tighten lamp
Perform a check using a level to
verify cause (refer to installation
section). If not level refer to installer
21