Table of Contents
Advertisement
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest level, the drive
belt may need to be adjusted. To adjust the drive belt,
first unplug the power adapter.
Next, locate the
Access Cover
(3) on the Right
Shield (74).
Remove the
#8 x 5/8" Screw
(101) and then
remove the
Access Cover.
3
101
74
Next, locate
and loosen the
Idler Screw (89).
Tighten the Drive
Belt Adjustment
Screw (91) until
the Drive Belt
(113) is tight.
Then, retighten
the Idler Screw.
When the drive belt is properly adjusted, reattach
the parts that you removed. Then, plug in the power
adapter.
24
113
89
91
Advertisement
Table of Contents
