Table of Contents
Advertisement
13. Identify the Right Upper Body Arm (61), orient it
as shown, and slide it into the Right Upper Body
Leg (60).
Attach the Right Upper Body Arm (61) with two
M8 x 45mm Bolts (96) and two M8 Locknuts
(102); make sure that the Locknuts are in the
hexagonal holes (C).
Repeat this step for the Left Upper Body
Arm (47).
14. Orient the Front Shield Cover (117) and the
Center Shield Cover (75) around the Upright (4)
as shown. Then, attach them to each other with
two #8 x 5/8" Screws (101).
Then, press the Front Shield Cover (117) and the
Center Shield Cover (75) into the Left and Right
Shields (73, 74).
13
47
61
14
75
12
96
60
C
102
4
117
73, 74
101
Advertisement
Table of Contents
