Philips HQ6675 User Manual page 6

ENGLISH
8
C
2
C
1
C
2
1
C
C
5 Put the shaving unit back onto the shaver.
Every two months: shaving heads
1 Switch the shaver off, remove the mains
plug from the wall socket and pull the
appliance plug out of the shaver.
2 Press the release button (1) and remove
the shaving unit (2).
3 Turn the wheel anticlockwise (1) and
remove the retaining frame (2).
4 Remove the cutters and guards and clean
them with the brush supplied.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the short-bristled
side of the brush.
Brush carefully in the direction of the arrow.