IKEA MUTEBO Manual page 12

Hide thumbs Also See for MUTEBO:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
How to remove and install: Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
Warning! The door is heavy.
Step 1
Fully open the door.
Step 2
Lift and press the clamping
levers (A) on the two door
hinges.
Step 3
Close the oven door to the first opening position (approximately 70° angle). Hold
the door at both sides and pull it away from the oven at an upwards angle. Put
the door with the outer side down on a soft cloth on a stable surface.
Step 4
Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards
to release the clip seal.
Step 5
Pull the door trim to the
front to remove it.
Step 6
Hold the door glass panels
on their top edge one by one
and pull them up out of the
guide.
Step 7
Clean the glass panel with
water and soap. Dry the
glass panel carefully. Do not
clean the glass panels in the
dishwasher.
Step 8
After cleaning, do the above
steps in the opposite se‐
quence.
Step 9
Install the smaller panel first, then the larger and the door.
Make sure that the glasses are inserted in the correct position otherwise the sur‐
face of the door may overheat.
To download the full version visit www.ikea.com
Caution! Carefully handle the
glass, especially around the edges
of the front panel. The glass can
break.
A
2
B
12
A
1

Advertisement

Table of Contents
loading

Table of Contents