Comply with the operating instructions Instructions for use and other useful information Dealing with recyclable materials Do not dispose of electric equipment and batteries as household waste Hilti Liion battery Hilti charger 1.2.3 Symbols in illustrations The following symbols are used in illustrations: These numbers refer to the illustrations at the beginning of these operating instructions.
The type designation and serial number are printed on the rating plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information Dispenser, cordless CD 4–22...
Page 9
Electrical safety ▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. ▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
Page 10
▶ Never leave the product unattended. ▶ Do not use the product if parts are damaged or if operating controls do not function faultlessly. Have the product repaired by Hilti Service. Safety at the workplace ▶ Keep the workplace tidy. Objects which could cause injury should be removed from the working area.
Page 11
Allow the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Page 12
Hilti recommends the batteries stated in the table at the end of these operating instructions for this product. For these batteries, use only Hilti chargers of the type series stated in the table at the end of these • operating instructions.
Page 13
Status indicators of the Liion battery Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health. 3.4.1 Indicators for state of charge and fault messages WARNING Risk of injury by a falling battery! ▶...
Technical data CD 422 Weight with aluminum tube in accordance with EPTA Procedure 01, with- 2.6 kg out battery Weight with cartridge holder in accordance with EPTA Procedure 01, with- 2.2 kg out battery Speed regulation 1 mm/s … 10 mm/s Storage temperature −20 ℃...
Page 15
▶ Do not secure a tool tether to the belt hook. Do not use a belt hook to lift the product. Comply with the national regulations for working at heights. As drop arrester for this product, use only a combination of the Hilti retaining strap and the Hilti tool tether #2261970.
4. Mount the included nozzle. 5. Insert the cartridge with the base facing the piston into the cartridge holder and tilt the cartridge downward until the front section is locked in position. 6. Manually push the piston rod forward to ensure that the cartridge is well-seated. Preassembly of aluminum tube for foil packs and cartridges 1.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with your product can be found at your Hilti Store or online at: www.hilti.group...
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of the reach of children. ▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions.
Need help?
Do you have a question about the NURON CD 4 22 and is the answer not in the manual?
Questions and answers