Special Features - Samsung WD7 T Series User Manual

Operations
Language
You can change the system language.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Language, and then tap
3. Turn the Navigation dial to select the desired language, and then tap
Factory Reset
You can reset the washing machine.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Factory Reset, and then tap
- Your washing machine resets to the factory setting.

Special features

AddWash (applicable models only)
To add laundry after the wash starts, use the AddWash door.
NOTE
The water inside the drum does not leak if the AddWash door is closed properly. Water drops may form
around the AddWash door, but water will not leak from inside the drum. This is normal.
48 English
U-PJT_COMBO-AD_SimpleUX_WEB_SSEC-02__EU_English.indd 48
.
.
.
1. Tap and hold to stop the wash cycle.
2. Press the upper area of the AddWash door to
unlock the door. The door will move inward slightly
when you press it and then open.
3. Open the AddWash door fully, and then insert
additional laundry through the AddWash door into
the drum.
4. Lift the AddWash door back into position, and then
lock the door by pushing the upper area of the door
until you hear a click. Then, tap and hold
to resume the wash cycle.
CAUTION
Do not put excessive force on the AddWash door. It
may break.
again
2022/4/16 11:05:24