Shooting Stand By Mode; Auto Power Save; Auto Power Off Temp - FujiFilm FF210001 Owner's Manual

SHOOTING STAND BY MODE

Choose the delay before the camera enters shooting standby
mode.
Option Option
5 MIN
2 MIN
1 MIN
30 SEC
15 SEC
OFF

AUTO POWER SAVE

If ON is selected, the display frame rate will drop to save power if
no operations are performed for a short period, but the normal
frame rate can be restored by operating camera controls.

AUTO POWER OFF TEMP.

If its temperature rises beyond a certain point, the camera will fi rst
display a message and then, if the temperature rise continues, auto-
matically end shooting and power down. Choose the temperature
at which the camera turns off automatically.
8
Option Option
STANDARD
HIGH
234
The camera will suspend all functions and enter power-
ing-saving (standby) mode if no operations are performed
for the selected period. To exit shooting standby mode, press
the MENU/OK button or another control.
Shooting standby mode disabled.
ON
The camera turns off automatically when its temperature reach-
es the STANDARD value.
Shooting can continue at temperatures higher than the
STANDARD value, extending the time available to record
movies and the like. Because remaining in contact with the
camera at these high temperatures could result in low-tem-
perature burns, this option should only be used after mounting
the camera on a tripod or taking other steps to avoid prolonged
contact with the camera.
Description Description
Options Options
Description Description
POWER MANAGEMENT
OFF