Replacing The Brake/Tail Light Bulb - Yamaha Star XV250G 2015 Owner's Manual

3. Remove the headlight bulb holder
by turning it counterclockwise,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Periodic maintenance and adjustment
Replacing the brake/tail light
bulb
1. Remove the brake/tail light lens by
removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
7-33
EAU70550
1. Brake/tail light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
7
[ECA10682]