2. Turn the locking screw (12) on the bottom of the motor /
control button panel (10/11) counterclockwise to loosen the
screw and then place the motor (10) onto the extendable
pole (13). Secure into place by turning the locking screw (12)
clockwise.
3. Turn the blade cap (4) clockwise in the direction marked
LOOSEN and remove it. Turn the plastic nut (6) on the motor
shaft (8) counterclockwise and remove it.
[Fig. 6]
EN
10
HOW TO USE
[Fig. 3]
[Fig. 4]
[Fig. 7]
[Fig. 5]