Table of Contents
Advertisement
5.3 TCP/IP
5.3.1 Lan Settings
This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point.
Here you may change the setting for IP address, subnet, DHCP, etc.
Object
LAN IP Address
Subnet Mask
WORK MODE
DHCP Client Range
Lease Time
Static DHCP
Domain Name
802.1d Spanning
Tree
5.3.2 Static DHCP
If user want to reserve specific IP for some device, you can bind the mac and the IP in this page.
Description
Router's LAN IP.
The default is 192.168.0.1. You can change it according to your needs.
Router's LAN subnet mask.
If it is selected, the router serves as the DHCP server and
automatically assigns IP addresses to all computers in the LAN.
Enter the start and end IP address of all the available successive IPs.
Select the time for using one assigned IP from the dropdown list. After
the lease time, the AP automatically assigns new IP
addresses to all connected computers.
This page allows you reserve IP addresses, and assign the same IP
address to the network device with the specified MAC address any
time it requests an IP address. This is almost the same as when a
device has a static IP address except that the device must still request
an IP address from the DHCP server.
Set the domain name of the Router.
Enable or disable spanning tree function.
Advertisement
Table of Contents
