System Requirements; Installing The Router - D-Link DIR-825M User Manual

Hide thumbs Also See for DIR-825M:

Table of Contents

3.1 System Requirements

◼

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

◼

One Cable/xDSL Modem that has an RJ45 connector (not necessary if the Router is connected

directly to the Ethernet.)

◼

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors

◼

PC subscribers use Windows XP, Windows Vista, Windows 7/8/10, MAC OS 9 or later, or Linux, UNIX

or other platforms compatible with TCP/IP protocols

◼

The above PC is installed with a Web browser

1. The Router in the following instructions means DIR-825M.

2. It is recommended to use Internet Explorer 7.0 or above to access the Router.

Before installing the Router, make sure your PC is connected to the Internet through the broadband service

successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the

Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry.

Step 1. Power off your PC, Cable/xDSL Modem and the Router.

Step 2. Locate an optimum location for the Router. The best place is usually at the center of your wireless

network.

Step 3. Connect the PC or Switch/Hub in your LAN to the LAN Ports of the Router with Ethernet cable.

Step 4. Connect the power adapter to the power socket on the Router, and the other end into an electrical

outlet. Then power on the Router.

Step 5. Power on your PC and Cable/xDSL Modem.

Chapter 3. Connecting to the Router

-12-

User Manual of DIR-825M

Table of Contents