Advertisement
Cleaning the shaving head
1
Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (fig. 17).
2
Remove the shaving foil from the shaving head (fig. 22).
3
Clean the shaving foil, the cutter block and the hair chamber with
the brush supplied.
Do not exert any pressure on the shaving foil to avoid damage.
1
Put the protection cap on the shaving head after use.
2
Rub a drop of sewing machine oil onto the shaving foil twice a
year.
Replacement
If you use the appliance two or more times a week, we advise you to
replace the shaving foil and the cutter block every 1 to 2 years.
A worn or damaged shaving foil may only be replaced by an original
Philips shaving foil (type no. HP6116).
The cutter block is available under type no. HP2911.
Environment
Do not throw the appliance away with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this you will help to preserve the
environment (fig. 23).
Guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
ENGLISH
11
Advertisement
