Advertisement
ENGLISH
10
2
Snap the shaving head onto the appliance (fig. 11).
3
Switch the appliance on.
We advise you to select speed I.
4
Stretch the skin with your free hand.
5
Place the appliance perpendicularly onto your skin, with the
on/off slide pointing in the direction in which you are going to
move the appliance (fig. 12).
6
Move the appliance slowly over the skin against the direction of
the hair growth while pressing it lightly.
Shave your bikini line as shown in the figure (fig. 13).
Shave your underarms as shown in the figure (fig. 14).
Cleaning and maintenance
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
Never rinse the appliance or the adapter under the tap (fig. 15).
Keep the appliance and the adapter dry (fig. 16).
Cleaning the epilating head
1
Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (fig. 17).
2
Remove the epilating head (fig. 18).
3
Remove loose hairs with the brush supplied (fig. 19).
4
Rinse the epilating head under the tap for 5-10 seconds while
turning it (fig. 20).
5
Shake the epilating head firmly and dry it thoroughly with a tea
towel.The epilating head should be completely dry before you
place it back onto the appliance (fig. 21).
Advertisement
