Related Manuals for UPLIFT Sidecar Shelf STR037
Summary of Contents for UPLIFT Sidecar Shelf STR037
- Page 1 Sidecar Shelf STR037 + STR038 or STR039 For assembly assistance, visit upliftdesk.com/contact, or call 800-349-3839, or email info@upliftdesk.com ©2023 UPLIFT Desk®. All Rights Reserved...
- Page 2 C-Frame The Sidecar Shelf can be installed on either the right or left side of your UPLIFT V2 or V2-Commercial Desk. These instructions apply to both the UPLIFT Desk C-frame (with 24” or 30” deep desktops) and T-frame (with 30” deep desktops).
-
Page 3: Left Side
C. Using the 5mm Allen Wrench, insert two of the M8 x 10 Button Head Screws in the threaded holes shown in the image leaving a gap of about ¼” (5mm) between the frame and underside of the screw head. ¼” (5mm) © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com... - Page 4 Key slots D. Align the large holes of the key slots in the Left and Right Extension Arms with the screws installed in the previous step. Position the Left and Right Extension Arms so they are touching the sides of the desk frame, with the screw heads entering the large holes in the key slots.
- Page 5 “O set” T-frame “O set” C-frame “O set” C-frame (SRD and COM) (SRD and COM) (SRD and COM) (SRD and COM) (SRD and COM) (SRD and COM) (SRD and COM) (SRD and COM) © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
-
Page 6: Installation
E. From the underside of the Extension Arms and Tray, loosely insert the six M6 x 8 Button Head Screws into the holes indicated in the previous step by the blue circles. Do not tighten any screws until they all have been started. - Page 7 Notes © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
- Page 8 Copyright Notice: This guide is a component of this UPLIFT Desk product. This guide is a part of © the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. These specifications are subject to United States copyright law.