Related Manuals for UPLIFT Acoustics OneWall
Summary of Contents for UPLIFT Acoustics OneWall
- Page 1 OneWall Acoustic Office Partition Mobile Wall and Cubicle Wall two person assembly For further info or assistance, visit upliftdesk.com 355 lb call 800-349-3839 or email support@upliftdesk.com Patent Pending, ©2018 UPLIFT Desk®. All Rights Reserved...
- Page 2 Thank you for choosing UPLIFT ACOUSTICS.
-
Page 3: Wall Construction
Rail extensions. Slide in until the Rails bridge and connect each Post together. Note: Make sure the Rail’s center indicator mark is pointing toward the top. This will make Step 8 easier. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com... - Page 4 Allen wrench. Tighten until snug, but do not over-tighten. Step 6 Repeat steps 4 and 5 for the remaining Acoustic Pan- els for this side of the frame. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 5 After all the frame screws have been tightened, re- peat Steps 4, 5, and 6 with the three Acoustic panels on the opposite of the frame. You’ve completed one wall assembly! © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 6 Step 2 Repeat this step for all of the Cubicle Walls you have assembled, and lean them against an open wall until you are ready to build the cubicle assembly. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 7 Hole Template Insert Acoustic Panel Hole Finder Mobile Wall and Cubicle Wall Remove and Use You can tear these center two pages without losing any other pages of your assembly booklet!
- Page 8 Preparing your Acoustic Panels Each Acoustic Panel has pre-cut holes in the material. But locat- ing the holes can be tricky. The templates on the next two pages can be used to locate the holes, and push the plugs out. Preparing a lot of Acoustic Panels If you’ve got a lot of panels to prepare, we offer an Acoustic Panel Hole Template (ACC033) to speed up the process of re-...
- Page 9 Acoustic Panel Hole Template - Left Corner Refer to Step 1 of the “Wall Construction” section for more details. INSTRUCTIONS: 1. Line up the template at the lower left corner of the acoustic panel. 2. Press on each of the hexagon hole shapes with your finger tip.
- Page 10 Acoustic Panel Hole Template - Right Corner Refer to Step 1 of the “Wall Construction” section for more details.
- Page 11 T-Bracket with the holes of one of the posts and at- tach it using four M5x25 Machine screws. Next, line up the holes with the post of the second Wall assembly and attach using four more M5x25 Machine screws. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 12 Bracket using four M5x25 Machine screws. Finally, move the fourth Wall assembly into place to form an X and attach it to the 4-Way Bracket using four more M5x25 Machine screws. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 13 Get creative! 2-wall L-joint 2-wall L-joint 4-wall X-joint 3-wall T-joint 2-wall L-joint 2-wall L-joint 4-wall X-joint 3-wall T-joint 3-wall T-joint 3-wall T-joint 2-wall L-joint 3-wall T-joint © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com 4-wall X-joint 4-wall X-joint...
- Page 14 Do not fully tighten the screws yet. Repeat on the other side. Once all four screws are started, you can tighten using your Allen wrench. Tighten until snug, but do not over-tighten. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 15 CAUTION: Read all instructions before assembly. Failure to assemble or operate properly may result in damage or personal injury. Retain manual for future reference. CAUTION: Do not attempt to assemble multiple wall cubicles with fewer than two people. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 16 Copyright Notice: This guide is a component of this UPLIFT Desk Acoustics Product. This guide is a part of the scope of delivery, even if the item is ©...