Asko DBI243IB.W.AU Operating Instructions Manual page 29

Table continued from last page
Problem
Cannot close door.
The dishwasher does not start.
Possible causes
The baskets are not correctly
positioned.
The Start/Stop start button has
not been pressed for long
enough.
The door is not properly closed.
You have opened the
dishwasher to add more dishes
while a program is in progress.
A fuse/circuit breaker has been
tripped.
The plug is not plugged into the
wall socket.
The water tap is turned off.
Overflow/leaks
A whirring sound (the drainage
pump) is heard from the
dishwasher and does not stop
when the main power switch is
turned off.
Check that the Delayed Start
option has not been selected.
Troubleshooting
Action
Check that the baskets are
correctly positioned horizontally.
Check that the dishes are not
blocking the baskets from
sliding properly into place.
Press and hold Start/Stop until
the display shows "Program
started".
Check.
Close the door and wait. After a
while, the dishwasher continues
the program.
Check.
Check.
Check.
Check.
Turn off the water tap. Pull out
the plug and call the service
department.
Press and hold Start/Stop for
three seconds if you want to
cancel the Delayed Start option.
29