Table of Contents
Advertisement
Using the dishwasher
If the dishwasher is not started within 2 minutes of the last button press, the machine switches off.
Time remaining
Once you have chosen a program, a program mode and options, the time the program took when
last used is displayed.
Once you have started the dishwasher, the display shows the remaining program time. The remaining
time is updated after the water for the final rinse has been heated.
This may differ somewhat from time to time depending on the temperature of the water supply, the
amount of dishes, the ambient temperature and other factors.
During the first run of each program, the remaining time displayed can be slightly misleading, as
the dishwasher is estimating the time. When you run the program a second time, the dishwasher will
calculate the remaining time based on the previous duration of the program.
Stopping or changing a program
In order not to accidently press a button and cancel the current program, you must press and hold
Start/Stop for five seconds if you want to change programs after starting the dishwasher. Add more
detergent if the lid of the detergent dispenser has opened. Then choose a new program and press
Start/Stop.
If you want to load more dishes
Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a
while, the dishwasher continues the program.
If the dishwasher is turned off due to a power failure
If the dishwashing program was not finished, the interrupted program continues when power is
restored.
NOTE!
During drying, the program is interrupted if the power is cut or the door is open for more than 2
minutes.
Once the program has finished
Once the program has finished, "END" appears on the display.
At the end of the program, you will hear a short beep. Chapter Settings describes how to change
this function.
The dishwasher switches off automatically after the program ends. Turn off the water tap after each
use.
How to get the best drying results
•
Fully load the dishwasher.
•
Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
•
Top up with rinse aid or increase the rinse aid dosage level.
•
Activate the Extra Dry option.
18
Advertisement
Table of Contents
