Starting The Dishwasher; Remaining Time; Stopping Or Changing A Program; If You Want To Load More Dishes - Asko DFS244IB.W/1 Operating Instructions Manual

Table of Contents

Advertisement

Delayed Start
When you select Delayed Start, the dishwasher will start 1-24 hours after you have pressed the button
Start/Stop and closed the door.
1. Press the button once to activate Delayed Start. Press the button several times – or hold it in –
to set the desired number of hours.
2. Press Start/Stop and close the door. The timer counts down and the dishwasher starts after the
selected delay.
If you want to cancel the Delayed Start option, open the door then press and hold Start/Stop for three
seconds.

Starting the dishwasher

Close the door properly, otherwise the dishwasher will not start. Press Start/Stop until the display
shows "Program started".
If the dishwasher is not started within 2 minutes of the last button press, the machine switches off.

Remaining time

Once you have selected a program, program mode and options, the time the program took when
last used is displayed.
Once you have started the dishwasher the display shows the remaining program time. The remaining
time is updated after the water for the final rinse has been heated.
This may differ somewhat from time to time depending on the temperature of the water supply, the
amount of dishes, the ambient temperature and other factors.
During the first run of each program, the remaining time displayed can be slightly misleading, as
the dishwasher is estimating the time. When you run the program a second time, the dishwasher will
calculate the remaining time based on the previous duration of the program.

Stopping or changing a program

In order not to accidently press a button and cancel the current program, you must press and hold
Start/Stop for five seconds if you want to change programs after starting the dishwasher. Add more
detergent if the lid of the detergent dispenser has opened. Then select a new program and press
Start/Stop.

If you want to load more dishes

Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a
while, the dishwasher continues the program.

If the dishwasher is turned off due to a power failure

If the dishwashing program was not finished, the interrupted program continues when power is
restored.
NOTE!
During drying, the program is interrupted if the power is cut or the door is open for more than 2
minutes.
Using the dishwasher
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfs244ib.s/1

Table of Contents