Monoblock Recirculation Filter (Optional); Replacement Of The Lighting - Novy Flat'line 7602 User Manual

Replacing the grease fi lters
− Before replacing the grease fi lter, clean the edges of the
part in the extractor hood in which the fi lter is placed.
− Grasp the fi lter with 2 hands.
− Make sure that the lock or the lip on the fi lter is on the
bottom side.
− Insert the back of the fi lter in the opening, press the fi lter
upwards at the front and make sure it clicks tight.

You can obtain a new grease fi lter from a dealer
or the Novy website. Article number grease
fi lter: 7400020.
3.3 Monoblock recirculation fi lter (optional)


Model 7605 / 7615 - This cooker hood, which
is connected to an external motor from Novy,
can only be used with an extraction duct to the
outside and is not suitable for recirculation.
If recirculation is chosen the appliance is connected to an
outlet box with a monobloc recirculation fi lter, or a monob-
loc recirculation fi lter is fi tted in the extractor hood behind
the grease fi lter.
Replacement indicator monobloc recirculation fi lter

Indication: red indicator light stays on
After a set time a red indicator light on the appliance shows
that the monobloc fi lter must be replaced.
Reset the replacement indicator

The motor must be on. When you fi t the new
monobloc fi lters, it is suffi cient to press the
and keys for 5 seconds at the same time to
3
reset replacement indication.

You can obtain a new monobloc fi lter from
a dealer or the Novy website. Article number
monobloc fi lter: 7600060.

3.4 Replacement of the lighting

Make sure there is no power on the hood and the lighting
has suffi ciently cooled.
Open the bottom panel
Undo the screws and slide the cover off.
Removing the LED light
A. First disconnect the cable that runs to the LED to be
replaced. Disconnect by loosening the lock by exerting
2
slight pressure while pulling loose.
B. Remove the LED to be replaced with a gentle rotating
movement to the left.
– 39 –