Lowrance GHOST Series Operator's Manual page 18

18 |
Item
Braided stainless steel
pull cable and handle
Wear bearing Yearly
Stow strap After each use
Stow bow arm/
mount stabilizer
Bushings As necessary
Foot pedal
Electrical terminals Yearly
Trolling motor
Direction indicator As necessary
Service and maintenance | Ghost Series Operator Manual
Occurrence Description
Before each use Visually inspect. Replace if damaged.
Visually inspect. Replace the wear bearings
(A) if necessary.
The wear bearings can be pried off using a
wide blade flat screwdriver.
Replace if damaged.
Before each use Visually inspect. Replace if damaged.
Inspect stabilizer for fitment to properly
support the motor during transportation.
Adjust and tighten lock nut as necessary.
Lubricate brass bushing points (A) with a
multi-purpose lubricant.
A
A
Remove excess quickly to avoid
discoloration or collection of dirt.
Check that terminal screws are not loose. If
needed, reapply Tef-Gel to the terminals.
Clean the indicator. Remove the indicator
by prying it off with a flat head screwdriver.
Blow/clean with rubbing alcohol.
A
A