Axis P5515-E User Manual page 54
Ptz network camera
Hide thumbs
Also See for P5515-E:
- Installation manual (90 pages) ,
- User manual (61 pages) ,
- Preventive maintenance instructions and checklist (12 pages)
Table of Contents
Advertisement
AXIS P5515-E PTZ Network Camera
System Options
3. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset
to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90
4. Using the installation and management software tools, assign an IP address, set the password and access the video stream
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.
54
Advertisement
Table of Contents
