Siemens Reyrolle 7SR5 Manual page 13

[sc_7SR5_size8_FrontViewPartWithdrawn, 1, --_--]
Figure 1-2
The relay element can be withdrawn from the relay case.
!
CAUTION
Inserting and removing the Device Element
When inserting the device element into the case, handle only from the front of the device fascia and
²
ensure no objects obstruct insertion of the element.
Ensure correct orientation of the device before insertion.
²
The captive screws on the front of the device should be loosened before withdrawal.
²
The rear retaining screw must be removed to allow withdrawal of the device from the case.
²
Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 05.2022
Size 8 Device with Element Part Withdrawn from Case
Introduction
1.1 Design and Hardware Characteristics
13