Venue 2 Wideband Receiver
Wireless Designer
Software and USB Driver
Windows Installation
Download the Wireless Designer software installer
from the web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
http://www.lectrosonics.com/europe/
or use the flash drive supplied with the receiver.
These instructions are useful for the first time the soft-
ware is being installed. Once the software is installed,
updates are available by simply clicking on an item in
the Help Menu. Refer to the help menu for details.
Launch the installer and follow the screen prompts.
I Agree on the EULA (end user license agreement)
must be checked to continue the installation.
18
The installer includes USB drivers, which only need to
be installed once. By default, the boxes are unchecked
in the installer, because they are not required except
for the very first time the software is installed on the
computer being used.
If it is the first time the software is being installed,
check the appropriate box to install the USB driver for
the receiver model you are connecting.
WD 64-bit USB Driver... is for use with the DR digital
receiver or Venue 2 receiver
LecNet2 64-bit USB Driver... is for use with earlier
Venue wideband receivers
If both USB drivers are installed, the software will com-
municate with whichever model is connected.
When the installation is complete, the confirmation
screen will appear. Click on Finish to complete the
installation.
LECTROSONICS, INC.
Need help?
Do you have a question about the Venue 2 and is the answer not in the manual?