Advertisement
Quick Links
Sedona Collection: Junior Loft
PARTS LIST
BOX 1: 4137 Sedona Junior Loft Ends
Part #
Picture
S0021END
BOX 2: 4136 Sedona Junior Loft Frame
Part #
Picture
S0001SRL
541750001
560750001
149383/40
5040-43181
5040-35410
Junior Loft Bed End
5/4x6 Mattress Rail
5/4x6 Support Rail
Individual Twin Slat
Hex Lag Bolt/Washer
#6 x 1 1/4 Phil Flat Slat Screw
COMPLETED ASSEMBLY
For: 4136 Frame Rails/4137 Loft Ends
Description
Description
5/4x4 Guard Rail
7030-01260 KIT
Quantity
2
Quantity
2
4
1
3
28
10
Advertisement
Related Manuals for Living Spaces Sedona Junior Loft 7030-01260 KIT
Summary of Contents for Living Spaces Sedona Junior Loft 7030-01260 KIT
- Page 1 7030-01260 KIT For: 4136 Frame Rails/4137 Loft Ends Sedona Collection: Junior Loft PARTS LIST BOX 1: 4137 Sedona Junior Loft Ends Part # Picture Description Quantity Junior Loft Bed End S0021END BOX 2: 4136 Sedona Junior Loft Frame Part # Picture Description Quantity...
- Page 2 1) Attach the one support rail (560750001) to the bottom of the end assemblies (S0021END) with 4 lag bolts and 4 washers (5040-43181), and tighten. 2) Attach two mattress rails (S0001SRL) and four guard rails (541750001) to the top of the end assemblies with 24 lag bolts and 24 washers (5040-43181), and tighten.
-
Page 3: Optional Setup
Optional Setup BOX 1: 4492 Sedona Super Storage Dresser Part # Picture Description Quantity 4492 Sedona Super Storage Dresser BOX 2: 4493 Sedona Stairway Chest Part # Picture Description Quantity 4493 Sedona Stairway Chest One or both of the above optional pieces can be purchased to accentuate the Sedona Junior Loft as pictured below:... - Page 4 8. Always use the ladder or bed end for entering and leaving the upper bunk. 9. Do not use substitute parts. Contact Living Spaces for replacement parts. 10. Use of a night-light may provide added safety precautions for a child using the upper bunk.
- Page 6 7030-01195 KIT (Scan code for instructional video) Sedona Collection: Knob Installation 1. Locate the box containing your knobs in the bottom drawer of your case good. 2. Identify which of the screw sizes is correct for your drawers/doors. The screw should protrude no more than 1/4"...